buy now
$159.99
Attention:
:Attention to customer please :We shipped from China, normally It will take about 10-20 days for the delivery, please wait with patience, thank you. Technical Specifications 1.Mode:
Cam: To set which mode you want the camera to be in.
TEST = Test mode
OFF = Power Off mode
ON = Active Passive Infrared mode / Power On mode
2.Time out:
To set the amount of time the camera will sleep between PIR Triggering.
1m = 1 minute
5m = 5 minutes
10m = 10 minutes
20m = 20 minutes
3.Resolution:
The resolution selection that you have chosen.
High (HI) = 8.0 Megapixels (Image interpolated from 5M Sensor),Video ( Hi ) =720P
Low (LO) = 5.0 Mega pixels ,Video ( Lo ) = 640X480
4.Video:
Sets the length of time how long you want to capture video.
Slide Frame switch to AVI, unit will snap a 20 seconds AVI per PIR trigger.
5.Burst:
To set the number of pictures or video length the camera will take per PIR triggering.
1P = Single still image captured per PIR triggering.
3P = Three continuous still images captured per PIR triggering.
5P = Six continuous still images captured per PIR triggering.
This is a 8.0 megapixel Low-Glow Type infrared Trail camera;it has an outstanding 50 feet night range and it’s capable of capturing clear video both day and night
Night Vision: It’s capable of capturing breathtaking video both day and night.At Daytime,the camera will take color photos and At night,it will take the White/Black Pictures.Focusing: 5ft to infinity;High precision multi-layer glass lens with coating;Effective viewing Angle: 50 degrees; PIR detection angle: 50 degrees.
On the picture of the still pictures and the video image,it will show the real time when the picture or video was taken which is a good database as a reference for your decision.
HD SECURITY CAMERA: You can set the resolution according to your private needs.Video: High (HI) = 8.0 Megapixels Video (Hi) =720P Low (LO) = 5.0 Mega pixels, Video (Lo) = 640X480.Support up to 32GB SD card.When the card is full,the LED screen will show “FULL” and the Green LED will flash about 5 seconds and then automatic power off.
Low power consumption: Sleep current is Less than or equal to 0.2mA.Active current (day): Less than 280mA ,Active current (Night): Less than 900mA;With full batteries (12 pieces)installed,it can standby for almost 1 year.But pls notice It at least needs 4pcs alkaline Batteries in a battery slot to meet the Power Supply requirement.(no battery included)—–1 Year Manufacturer Warranty.